.

Rational industrial protection systems – this is what RSBP stands for. At RSBP, we are devoted to fire and explosion protection since 1992. As part of our activities, we also participate in research and development in the field of fire and explosion protection and prevention. Accurately performed research and development brings the necessary knowledge for the development of new products, rationalization, and improvement of the parameters of existing ones in the field of quality, characteristics, and functions. The stimulus for the implementation of research and development is the ever-increasing emphasis on ensuring the safety of technological operations not only in terms of fire and explosion protection but also in terms of protection of lives, health, and property. This phenomenon can be seen in the requirements of customers and our partners, as well as legislative and normative regulations, which are fully complied with. Due to the implementation of our research and development into the production process, we can offer products that exceed the quality of products of competing companies. Our devices meet the demanding requirements not only of our customers and partners but also the strict criteria set by the legislation of the EU, the USA, and Russia, thus bringing variability in the protection of technological compounds. Our projects meet all the necessary standards, regulations, decrees, and directives, applicable worldwide. At RSBP we take into account the current state of technology and design an efficient, affordable, and simultaneously smart solution. The RSBP company follows quality management system according to ISO 9001:2015 and has ATEX certification according to Directive 2014/34/EU.

Sachtleben Technology GmbH is the manufacturer of a web-based inventory tracking and management system for bulk materials. Individual time intervals and automated evaluation of 3D data from permanently installed LiDAR sensors enable inventory tracking of bulk materials in warehouses or storage boxes. A system like a level sensor in a silo only for loose bulk material - a continuous inventory.

With more than 20 years experience in the packaging sector, MARCO GIORGI decided to create a group of companies that deals with the world of packaging. What followed was the study, selection, and manufacturing of machines and materials to reduce environmental impact derived from packaging and products, both during implementation and discard, with the objective of finding increasingly efficient and economical solutions for both companies and clients.

This year, SMERI celebrates its anniversary: 60 years of experience and expertise in the field of measurement technologies for industrial processes. It takes advantage of an extremely dynamic team, who with their individual and refined skills can satisfy all requirements, even the most stringent ones, for the monitoring and control of level, flow and pressure variables in the various industrial branches. The manufacturing companies SMERI represents are all first-class in their sector. Chemical, chemical-pharmaceutical plants, food industry, feed mills, mining, cement plants, synthetic materials and oil industry, woodworking, glassworks, sewage treatment and recycling are (only) some of the sectors of SMERI's expertise. A close and long-standing collaboration binds SMERI to UWT, one of the world's leading manufacturers of measurement technology for the detection and monitoring of levels, limit levels in any kind of bulk materials, solids as well as in liquids, pastes and foams. Since 1977, UWT has been developing precise, reliable, long-lasting technologies and systems with all the required industrial and safety certifications. Its customer-oriented approach - with intuitive interfaces, the possibility of communication and remote control, assistance and a 6-year guarantee - is always focused on simplifying the work of the operator and the plant technicians. Thanks to continuous improvement and great cooperation with end users, UWT offers solutions in all kinds of applications. UWT products are distributed in more than 70 countries through exclusive sales partners, in growing markets such as Asia (China and India) and the USA, as well as in Europe, Brazil and Mexico.

Zanocco SMI is a point of reference in the automation and safety sector thanks to the experience of Zanocco SRL for more than thirty years in the industrial and civil plant engineering sector. Zanocco SMI offers tailor-made protection against explosions, gas leaks and fires for all systems installed in mills, carpentry shops, feed mills, food and chemical industries and automotive companies, where dust, vapours, mists and gas. The solutions offered provide an innovative service to protect investments, avoiding costly reconstructions and contributing to significant savings in terms of money and time. Our explosion suppression systems guarantee: SAFETY OF PEOPLE ENVIRONMENTAL PROTECTION PROTECTION OF ASSETS integrating perfectly with the existing industrial production plant, without penalizing or slowing down its operation, thus ensuring a minimal impact on performance. SAFETY The highly specialized Zanocco SMI team of engineers is able to offer: • construction of new anti-explosion systems (including adaptations or expansions) • solutions, in the event of an explosion, to eliminate side effects, limiting plant downtime and minimizing production loss and damage to people and property • tailor-made solutions for the different types of systems, preventing the occurrence of announced events, limiting explosions and isolating them with one of the four ad hoc systems. EXPLOSION PREVENTION The advanced explosion prevention systems supplied by Zanocco SMI are able to prevent the occurrence of events that could lead to early alarms. Prevention through control, by analyzing, for example, an atmospheric sample to reduce the oxygen content, or by immediately intercepting sparks and smoke caused by an explosion, or by monitoring the concentration of flammable or toxic gases inside a The area… is essential to implement appropriate countermeasures in real time. EXPLOSION ISOLATION Anyone familiar with explosions and their aftermath knows that secondary explosions cause the most damage! The mistake of protecting only the volumes or a part of the plant that is believed to be most at risk causes the explosion to be transported to other sections of the plant, becoming significantly more powerful due to the precompression effect. If this happens, even an explosion protection system has no chance of being effective. For this reason, explosion isolation represents an essential component in the development of explosion protection concepts. Zanocco SMI engineers and developers guarantee a high level of safety by adapting the anti-explosion safety concept to the customer's needs, paying particular attention to the management of insulation systems. Depending on the technology used, the process can be restarted immediately after activation without downtime or repair costs. VENTURE OF EXPLOSIONS For industrial processes where it is necessary to adopt measures to reduce and control damage due to the occurrence of an explosion, Zanocco SMI offers venting devices of different types, suitable for discharging and conveying the effects of an explosion to a safe place, away from people and things (vent devices), or to be able to manage them safely even in internal applications or with limited spaces (indoor vent devices). EXPLOSION SUPPRESSION Explosion suppression systems are becoming increasingly important and widespread both for their reliability and for the possibility of guaranteeing rapid restart of protected plants and machinery even following an explosion. The intervention times of the explosion suppression systems are of the order of milliseconds; thanks to optical or dynamic pressure detectors, the explosion is detected in the bud and suffocated by activating extra-rapid extinguishing systems. The management and extinction of the explosive event in its initial phase allows the effects of overpressure and temperature to be efficiently dampened, thus guaranteeing not only the safety of people, but also limiting the structural stress on the protected equipment to a minimum, at in order to protect the integrity of the production plants. The reliability and functionality of the protection system components is continuously monitored by the protection system management centre, which is designed to guarantee a reliability level equal to SIL 2. The development of new extinguishing agents (powders with FDA requirements, extinguishing systems using hot water technology), together with the development of nozzles suitable for CIP and SIP cycles, guarantee the diffusion of these systems even in areas with extremely high hygiene requirements, such as the pharmaceutical and food industries. Zanocco SMI takes care of every single aspect during the design and construction phase, offering: ■ accurate inspections to evaluate the activity by identifying the areas exposed to the risk of potentially explosive atmospheres ■ classification of areas at risk based on the probability and duration of the presence of explosive atmospheres (Art. 290 of Legislative Decree 80/08) and subsequent subdivision of the areas as required by law (zone 0, zone 1 and zone 2 for gases, vapors or mists and zone 20, 21, 22 for dust) ■ evaluation of existing systems and the possible possibility of increasing their safety level through organisational, procedural or technical measures ■ drafting of the document on protection from explosive atmospheres (Art. 294 of Legislative Decree 81/2008), in accordance with Directive 99/92/EC ■ shared design with the customer to plan every detail of the new system. SERVICE ON ALL TYPES OF EXPLOSION-PROOF, FIRE-FIGHTING SYSTEM... Zanocco SMI is one of the few companies in the world to guarantee maintenance on national and international territory of anti-explosion systems by providing: ■ six-monthly or annual interventions ■ periodic checks of plant operation ■ release of intervention reports for maintenance

Stawimpianti is partner of hundreds of companies, which are supported in designing, manufacturing and supplying of turnkey plants for storing, dosing, conveying and packaging of solid bulk materials such as powders, granules or flakes. The headquarters located near Milan (Opera), in addition to the technical, commercial and administrative offices, also has an internal department for software design and a test plant which is always available for customers and good to test powder conveying and mixing solutions.

StuvEx International NV designs, implements and maintains protection systems against dust explosions and fire in the process industry. Problem analysis, concrete design, supply of materials, implementation and maintenance. So that you can rest assured.

SWECO, a business unit of M-I L.L.C., is the world leading manufacturer of customized industrial separation equipment in particle separation and size reduction solutions offering a full line of separation and grinding equipment as well as screen innovations prescribed for all markets SWECO manufactures round, rectangular and pharmaceutical separators plus several lines of complementary separation products; centrifuges, grinding mills, finishing mills and a wide variety of aftermarket screens and parts.