- JET and EUROJET series - Columbus series - Antistatics plastic elevator buckets - Welded steel steel and stainless steel BOLTS WITH NUTS AND WASHERS FOR FIXING THE BUCKETS TO THE ELEVATOR BELTS BLANK, NICKEL-PLATED, ZINC-PLATED, STAINLESS STEEL AISI 304

Elevator buckets, pressed or welded on demand

SPECIAL ELEVATOR BUCKETS FOR EACH RAW MATERIAL We also supply welded (according DIN standards) or plastic buckets for minerals and particularly challenging conditions, centrifugal or gravity discharging. Our elevator bucket program also includes the well-known European models (Columbus, Starco and Super Starco) in pressed steel, stainless steel, HDP, polyurethane or nylon. For over 25 years Muller Beltex has been the distributor in Europe of Maxi-Lift® plastic elevator buckets. These are very economical buckets for high capacities and abrasive bulk products. All types are available in HDPE, wear-resistant and non-adherent polyurethane or Zytel heat-resistant nylon and are very abrasion-resistant. With our additional components we offer a high-quality package with optimum production as a result.

ELEVEX is the effective solution of bulk material vertical transport explosion protection. ELEVEX reduces explosion pressure to an extremely low value, which means that even existing and used technologies can be safely protected in case of explosion completely without destructive effects. The list of factors that can cause an explosion in a bucket elevator or similar vertical transport system is long, and the probability the an explosion will occur during operation is high. Although use of this system does not prevent origination of an explosion in an elevator, the actual explosion effects can be brought to a minimum.

ELM- Low Speed Bucket Elevator with toothed drive wheels and double chains connected to the bucket sides. Similar to ELR elevators but mounting roller chains with pins and bushings fixed to the bucket sides, to ensure central discharge aligned with the elevator. The main features of the elevator include the following: - standard dimensions of the same series as for high-speed elevators, starting from 315 mm - sturdy buckets, suitable for dredging on the reinforced outer side and discharging on the opposite internal side. Four holes are drilled into the sides for connection to the chains - toothed return wheels - link chains with side plates, pins and fixed bushings. Certain plates have drilled shaped attachments for connection to the buckets - tangential feed inlet on idle station - central discharge outlet under drive station - standard tensioning system featuring parallel tensioning by counterweight Alternatively, a hydraulic tensioning system can be used Type of discharge: central gravity

Low-Speed Bucket Elevator with round link chains. Type of bucket elevator with two continuous drive chains and toothed wheels. The chains are anchored to the sides of the buckets to ensure central discharge aligned with the elevator. The main features of the elevator include the following: - standard dimensions (i.e. bucket width) of the same series as for high-speed elevators, starting from 315 mm - sturdy buckets, suitable for dredging on the reinforced outer side and discharging on the opposite internal side. The sides are fitted with suitable attachments for connection to the chains - drive wheels with replaceable teeth for driving the chains - return wheels with hub and smooth rings - high-grade alloy steel continuous chains with lond strands - couplings for connecting the chain strands - flat and round driving pins for connecting the buckets to the chains - tangential feed inlet on idle station - central discharge outlet under drive station - standard tensioning system with contrast springs, pair of threaded bars and adjustement nuts

Function: -armored chain conveyors for hopper discharge of crushed limestone, stickly materials as chalk, gypsum, clay or coal - armored chain conveyors are 2-8 strand chain conveyors designed to convey material on the upper side, lined with wear resistant base plates - high capacity of bulky and sticky materials, continuously discahrged and metered from bunker Applications: - railroad car discharge - coal silo feeding - quarry feeding and discharge operations - crusher feeding - materials conveyed: coal, clay, limestone, clinker, gypsum, potash, petroleum coke, cement, lime gypsum Main Features: - wear resistant version - round link chains with cleaning scrapers - compact design with reduced height - variable chains speed and capacity - impact resistant design

Stawimpianti big bag emptying systems can be equipped with a spout for big bags with valve, or with cutting blades for closed big bags. Designed on customer's needs, devices such as side pushers, lifting hoists and suction systems can be inserted depending on the situation.

Within the world of AIRFLASH compressed air cannons, EOLO is the fundamental accessory for managing fine-grained material. EOLO is a distribution grid that allows you to optimize the diffusion of the shock wave generated by the cannon, amplifying its disintegrating force and implementing a cleaning action on the internal surfaces of the storage structure. It can have a linear shape (500mm modular composition) or circular shape and is available in different sizes depending on the type of system. In addition to improving the level of cleanliness, EOLO protects the protection device from possible infiltration of material inside the cannon.

Heavy duty, high temperature, high accuracy Main features: - constant loading and variable chain speed through frequency inverter - 4 load cells installed on an indipendent frame - heavy duty pans (8 mm thick) for truck and hopper loading and feeding - heel plate on loading chute for lumpy materials Weighing system: - automatic calibration program - preset default values for quick and easy commissioning - wall mount housing for installation at site - remote control - 4 load cells with output balancing - frequency inverter Main advantages: - heavy duty version for hot materials - compact, only 5 m long - high accuracy thanks to software load cell output balancing - combined feeding and weighing functions in a single unit - mechanical weight adjustement - electrical weight adjustement - low vibrations system Scope of supply: - apron weighing feeder complete with weighing system, frequency inverter, electric board - commissioning and calibration of the weighing system

Zanocco SMI provides for every step in designing and development by offering: ■ accurate surveys aimed at evaluating activities in order to pinpoint areas exposed to risk of potentially explosive atmospheres ■ classification of risk areas based on probability and duration of explosive atmospheres (Art.290, Law decree 80/08) and subsequent division of areas as per relevant regulations (zone 0, zone 1 and zone 2 for gases, vapours or mists and zone 20, 21 for powders) ■ evaluation of existing facilities and of possible increase of safety level by means of organizational, procedural or technical measures ■ issue of document stating protection from explosive atmospheres (Art.294 Law decree 81/2008) in accordance with EU leg. 99/92 ■ new system is designed with customer in order to plan every detail of the new system

ESP - Medium-speed continuous bucket elevator, with double chains connecting the rear of buckets. The mild centrifugal force due to low speed causes part of material to flow off the back of the preceding bucket. Bucket elevator with chains driven by toothed wheels. The main features of the elevator include the following: - standard dimensions in conformity to DIN specifications starting from 315 mm, with increased width for larger elevators - high-capacity buckets with extended sides in the upper section (buckets in the discharge phase) so as to contain the material arriving from the bucket behind The back of the buckets features holes for connection to the chains - Drive wheels with interchangeable toothed segments for driving the chains - Toothed return wheels - Link chains with side plates, pins and fixed bushings. Certain plates feature drilled angular attachments for connection to the buckets - Tangential feed inlet on idle station - Tangential discharge outlet on drive station - Standard tensioning system featuring parallel tensioning by counterweight Alternatively , a hydraulic tensioning system can be used Type of discharge : tangential, partly centrifugal and partly gravity discharge

ESPC - High-speed bucket elevator with single central chain. Bucket elevator with a single chain driven by a toothed wheel. The main features of the bucket elevator include the following: - standard dimensions in conformity to DIN specifications starting from 200 mm, with increased width for larger elevators - buckets od suitable capacity and shape, with four holes on rear end for connection to the chain - toohed return wheel - link chain with side plates, pins and fixed bushings. Certain plates fature drilled angular attachments for connection to the buckets - tangential feed inlet on idle station - tangential discharge outlet on drive station - standard tensioning system with contrast springs, pair of threaded bars and adjustement nuts. Alternatively, a hidraulic tensioning system can be used Type of discharge: tangential - centrifugal

High-speed continuous bucket elevator, with doble chains connected to bucket sides. Suitable for handling very large capacities (up to 1,500 m3/h or more). Can also be used at medium speeds similarly to those used on ESP Bucket elevators; part of the material is discharged by flowing onto the back of the preceding bucket. When used at medium speed, medium-sized materials can be lifted (70 - 80 mm). Elevator with chains connecting buckets that are driven by toothed wheels.