Filters for air purification characterized by high dust contamination. Cartridge dust collectors were born as an alternative to traditional bag filters what they allow, for the same size, a filtering surface 20 times greater. Depending on the type of powder to be treated, cartridges are available with different dimensions and characteristics, so as to cover a wide range of needs.

THE BAG FILTER is a TEXTILE FILTRATION dust collector with counter-current compressed air cleaning of the media. This system allows to purify large flows of air characterized by a HIGH CONCENTRATION OF DUST. Filtration takes place through the combined effect of three mechanisms: inertial impact, interception, diffusion.

Textile filtration dust collectors with compressed air media cleaning current. This system allows you to purify large air flows characterized by high dust contamination. Filtration occurs through the combined effect of three mechanisms: INERTIAL IMPACT, INTERCEPTION, DIFFUSION.

Centralized systems for the filtration of neat and emulsified oil mists. Centralized systems serving machine tools, CNCs, lathes, milling machines and machines with coolant.

How to protect you and your company against fire Zanocco SMI provides fire protection solutions such as: automatic fire detection system, automatic water extinguishing system (“sprinkler”), smoke and gas detection system, smoke and heat exhaust systems, fixed extinguishing system Designing and installing fire prevention systems Fire detection systems must safeguard people, assets and premises within the protected areas, promptly reporting the occurrence of dangerous situations. Evaluation of the type of fire hazards in the locations that need protection is the starting point for choosing the most suitable system. Zanocco SMI protection systems and solutions are developed by fire protection and anti-explosion experts who have wide experience in this sector and in safety technologies. Zanocco SMI provides fire protection solutions such as: automatic fire detection system automatic water extinguishing system ("sprinkler") smoke and gas detection system smoke and heat exhaust systems fixed extinguishing system Quattro sono i principali sistemi proposti: Fire extinguiishing systems for tunnels ADW system ASD system Addressable control panel Fire extinguishing systems for tunnels A fire prevention system to be used in two new t

The installation of fire protection system monitoring software is a fundamental requirement for controlling the status of the system. Fire prevention monitoring and control systems ensure constant monitoring of the correct functioning of the installed systems and immediate notification in the event of any anomalies in one of them. The aim is to promptly report any signs of fire, avoiding false alarms, so that the necessary safety measures can be put in place to contain and extinguish the fire.

Application In case of an explosion, the Flame Catcher prevents flames from propagating beyond the Flame Catcher. On the inside, the Flame Catcher contains many layers of metallic mesh which forms the flame arrestor element. This flame arrestor will reduce the temperature of the incandescent dust and gas below their ignition temperature. Incandescent dust is retained within the arrestor element and gases from the explosion are vented through the device into the external atmosphere around the Flame Catcher. Flame Catcher™ is typically used to protect dryers, mills, filters, cyclones, etc. Flame Catcher™ features − Complies with EN 16009:2011 − Casing available in carbon or stainless steel or aluminium − Easy to install − Virtually maintenance free − Flame arrestor mesh available in packs for easy replacement − Pred,max 0,5 barg − Pmax 10 bar − Operating temperature range -20 to 70°C

Single and double shaft-mounted flap valves for separating sections with different pressures, with electro-mechanical, pneumatic or hydraulic drive

For handling and unloading particularly dusty materials that are particularly sticky

FLEX guarantees explosion venting in enclosed or internal spaces without propagation of flame, dangerous pressure and heat to near surroundings, therefore the equipment and technologies that are located in hard to access spaces can be protected by the flameless explosion venting without increased costs for building modifications that are usually related to installation of classical explosion relief equipment.

They have always been ATAG’s core business. We have a wide experience in the field and we go on learning from every day direct work with you. We closely collaborate with our customers to help them deal with their needs.

In our manufacturing facility, classified as ISO 7/8, we produce, in accordance with GMP requirements and clients’ specific needs, continuous liners and flexible isolators, sometimes called glove bags, to confine all the exposed operations or temporarily modified the inner atmosphere (cleaner area, low humidity or inert needs). Similar to plastic bubbles with gloves, filters, zippered doors, wires and hoses pass through and any required tools, they are usually ad hoc products. They are made of basic pharma low-density polyethylene or Polyurethene films directly supplied by CSV Containment, but we can also transform material provided by third parties indicated by the end customers. The always-increasing quality of our work and the effort to improve constantly have led several costumers to authorize us as Qualified flexible technology supplier.

Suitable for transport of grains, flours, abrasive powders, sugars, shavings, processing scraps; with various certifications and permanent antistatic treatments. Our hoses are made in ether or esther based polyurethane. Available in a variety of thickness and weight, flexibility, performance and durability